Description
Performance summary
DC-955C thick transparent pulp is mainly used for printing on thick plates of shoe upper materials such as three-layer mesh, space leather, microfiber leather, real leather, high-elastic nylon cloth, etc. It is characterized by high accumulation rate, flexible handle and good elasticity. printing workability good, very excellent fastness, UV-resistant, cold, folding ( -20 deg.] C continuous folding machine 15 million or more times, wet-off 15 or more cycles), excellent acid and alkali resistance, resistance to hydrolysis. The product meets environmental protection standards, has excellent freezing resistance, does not contain formaldehyde, does not contain APEO , and can be used for children’s clothing printing.
Product properties
Appearance: milky white paste
Composition: polyurethane and additives
P H ：7.5~8.5
Reference prescription
|
Base printing |
Color printing |
|
|
Dark , medium, light |
|
DC-955C 98%-96% |
95% ～ 93 % 85% ～ 73% 65% ～ 43% |
|
Water-based pigment 0 |
3% ～ 5 % 3% ～ 5 % 3% ～ 5 % |
|
DC-955W 0 |
10% ～ 20% 30% ～ 50% |
|
DC-260 crosslinking agent 2%-4% |
2 ％ 2 ％ 2 ％ |
|
Total 100% |
100% 100% 100% |
Printing process
Self-drying ( after 96 hours)
Printing and drying ( 6-8 times for bottom printing, 2-4 times for covering )
Baking ( 80 ℃× 8 hours)
Precautions
1. Since DC-955C is used with a special cross-linking agent, customers are not allowed to change or increase or decrease the cross-linking agent at will.
2. Generally speaking, 2% curing agent is enough; if there are special requirements, the amount of curing agent should be increased as appropriate. The printing paste with curing agent must be used up within 4 hours, otherwise the consequences will be caused. , The company is not responsible.
3. After printing, the printed surface must be fully heat-treated (baked) to fully display its excellent printing effect. If it is dried naturally, the fastness can be tested only after 96 hours.
4. The storage period of this product is 12 months. Please keep it in a low-temperature and dry place. The lid must be tightly closed after use to avoid skin formation on the surface, which may affect reuse. Cover the bottle cap after using the matching curing agent, and do not open it in the air!
5. Due to the variability of chemical products, whether the company provides small samples or bulk goods, the factory needs to make careful samples according to the specified process conditions, and can be put into mass production only after the various fastness tests are qualified. The company will not bear any loss caused by untested.
