Description
Y -type water-based ink white / transparent
Performance summary
Y-type water-based ink has good operability and screen passability. It can be used for printing dot patterns (differentiation dots) of cotton, linen, T/C and other fabrics. It has the characteristics of good coverage, bright colors, clear dots, and soft touch. The product complies with environmental protection standards, does not contain formaldehyde, APEO , plasticizer, heavy metals, etc., and can be used for children’s clothing printing.
Product properties
Appearance: white paste
Composition: Acrylate polymer, additives
P H ：7.5～8.5
Reference prescription
|
|
White printing plus color printing |
|
Y-type water-based ink white |
99-100% 20% |
|
Y-type water-based ink through |
—– 80% |
|
Color |
—– 0-5% |
|
L-300 curing agent |
0-1 % 0-1 % |
|
total |
100% 100% |
Printing process
180-200 mesh screen — printing 2 knife — flashing — baking ( 150 ℃× 2 minutes)
Precautions
1. Adding curing agent L-300 1% can effectively improve the firmness of the printed surface to meet special fabrics or high-demand printing. The printing paste with curing agent must be used up within 24 hours.
2. After printing, the printed surface must be fully heat-treated (baked) to fully display its excellent printing effect.
3. The storage period of this product is 12 months. Please keep it in a low temperature and dry place. The lid must be tightly closed after use to avoid skin formation on the surface, which may affect reuse.
4. Due to the variability of chemical products, whether the company provides small samples or bulk goods, the factory needs to make careful samples according to the specified process conditions, and can be put into mass production only after the various fastness tests are qualified. The company will not bear any loss caused by untested.
Reviews
There are no reviews yet.