GM-623 high-grade handprint glue

Description

GM-623/GM-623A high –  grade handprinted white glue / transparent glue

GM-623/GM-623A handprint glue is suitable for printing on cotton, linen, T/C and other fabric glue. Its characteristics are easy to use, good printing operability, dry, non-sticky, good elasticity, high hiding power, good fastness, especially good dry and wet fastness. The product complies with environmental protection standards, does not contain formaldehyde, APEO , plasticizer, heavy metals, etc., and can be used for children’s clothing printing.

Appearance: white paste

Composition: Acrylate polymer, additives

P H ：7.5～8.5

100-120 mesh screen water-based sharp knife — printing 2 knife X 3 times — baking ( 130 ～ 150 ℃× 2 minutes)

1.  Adding a curing agent can effectively improve the firmness of the printed surface to meet special fabrics or high-demand printing. The printing paste with curing agent must be used up within 24 hours.

2.  After printing, the printed surface must be fully heat-treated (baked) to fully display its excellent printing effect.

3.  The storage period of this product is 12 months. Please keep it in a low temperature and dry place. The lid must be tightly closed after use to avoid skin formation on the surface, which may affect reuse.

4.  Due to the variability of chemical products, whether the company provides small samples or bulk goods, the factory needs to make careful samples according to the specified process conditions, and can be put into mass production only after the various fastness tests are qualified. The company will not bear any loss caused by untested.